Honors Theses
Date of Award
Spring 5-7-2022
Document Type
Undergraduate Thesis
Department
Mechanical Engineering
First Advisor
Damian Stoddard
Second Advisor
Tejas Pandya
Third Advisor
Arunachalam Rajendran
Relational Format
Dissertation/Thesis
Abstract
The introduction of hemp fibers into a polylactide (PLA) matrix creates a hemp fiber-reinforced composite with 10% hemp fibers and 90% PLA. Natural fibers are becoming a popular alternative to synthetic fibers since they are environmentally friendly, and hemp-fibers are becoming used more often as the demand for natural fibers increased. A Split-Hopkinson Pressure Bar was used to test this composite against a control group using elastic wave propagation theory. Strain gauges were mounted on the incident and transmission bars of the SHPB to measure the propagation of the wave that caused the strain in the sample, which were used to calculate the values desired. Each material was tested under three different pressures of the gas chamber in the SHPB to yield a range of strain-rates: 30, 40, and 50 psi. The ultimate compressive strength, damage initiation energy, and damage propagation energies were analyzed to conclude whether the hemp fibers had an impact on the performance on the PLA matrix. The range of strain-rates in the control group and hemp composite group was 1807-2800 /s and 2112-2925 /s, respectively, and the ultimate compressive strengths were 112.5-128.8 MPa and 72.8-110.8 MPa, respectively. Subsequently, the total specific energy of the control group and hemp composite group ranged from 24.3-35.4 kJ/kg and 19.84-25.2 kJ/kg, respectively. These results showed that the introduction of hemp fibers into the PLA matrix caused the compressive strength and specific energy to decrease significantly. The conclusion was that the hemp fiber-reinforced PLA composite showed lower compressive strength and specific energy under high strain-rates than PLA with no fibers added.
Recommended Citation
Rhoads, Benjamin, "Analysis of Hemp Fiber Reinforced Polylactide Composite Under High Strain-Rate" (2022). Honors Theses. 2564.
https://egrove.olemiss.edu/hon_thesis/2564
Accessibility Status
Searchable text
Creative Commons License
This work is licensed under a Creative Commons Attribution 4.0 International License.